| Flow rate | : | 30 l/h -130 m³/h | 0.132 USGPM – 572 USGPM |
| Pressure | : | up to 24 bar | 360 PSI |
Advantages and Characteristics
Service-friendly due to plug-in connections between rotating unit and drive, dismantling/mounting without special tools
Optimised, pump housings without clearance volume prevent product deposits
High-quality surfaces of the housing walls and the rotating inside parts simplify residual-free cleaning
Easily mountable joints increase the service-friendliness
Proven mechanical seals adapted to the respective application provide for hygienic shaft sealing.
Stator material and secondary seals with FDA approval guarantee high product safety
CIP rinsing (Cleaning In Place) with high flow rates in the suction casing provide for residual-free and bacteria-free cleaning
SIP (Sterilisation In Place) with superheated steam possible during cycled operation of the pump.
The pumps of the CS range comply with the regulations of the 3A-Sanitary Standards of the USA and the EHEDG directives.
Ranges
 |
Range BCSO |
| – Open aseptic joint | |
| – Conveying capacities: 30 l/h – 130 m³/h 0.132 USGPM – 572 USGPM | |
| – Pressures: up to 24 bar | 360 PSI |
 |
Range BCSB |
| – For conveying abrasive conveying media | |
| – Proven, cost-efficient, closed pin joint | |
| – Conveying capacities: 30 l/h – 130 m³/h 0.132 USGPM – 572 USGPM | |
| – Pressures: up to 24 bar | 360 PSI |
 |
Range BTCS |
| – For pumping highly viscous products with a low degree of flowability. | |
| – Conveying capacities: 30 l/h – 130 m³/h 0.132 USGPM – 572 USGPM | |
| – Pressures: up to 24 bar | 360 PSI |